Getting the Perfect Fit: How to Remove Watch Links

One of the most important items you should have in your wardrobe are watches. They are useful tools, conversation starters, and occasionally status symbols. While there are many different types of casings, including field watches, pilot watches, dive watches, and even tactical watches, there are also many different types of bands available. You can purchase metal bracelets, leather straps, silicone/rubber straps, mesh components, and straps to give your watch a distinct look and feel. Unfortunately, if you choose a metal bracelet, you probably won’t be able to get rid of the watch links without paying more.

Standard metal bracelets are made up of several links that are joined to form a distinctive and appealing band that gives your watch a touch of refinement. Of course, not all guys are made equally, thus for the majority of us, watch link removal is important.

The simplest method is to bring your watch to a jeweler store and have someone else do it, but that can cost up to $45 for a standard watch or even more if it’s a fancy model. Fortunately for you, removing links yourself at home is a quick and simple operation once you get the hang of it, making your wrist the center of attention.

Step 1: Measure

Customization is intended for metal watches. Making ensuring the fit is perfect begins with measuring your wrist and the watch itself. There are various methods you can use to accomplish this.

Use the watch itself

• Put your watch on your wrist.
• Gather the links up until it fits the way you want and count how many are in excess.
• Plan to remove the links evenly from both sides of the watch so that your clasp remains in the middle.

Use a cloth tape measure.

• Lay your watch out flat on the table.
• Measure your wrist using the cloth tape measure.
• Place your watch in the middle of your measurement and plan to remove the links on either side to ensure an even clasp.

You can now proceed to the following section.

Step 2: Compile your equipment.

Keep in mind that you are handling tiny bits. One missing screw will force you to make the long trip to the jeweler, which is exactly what we’re trying to avoid. You will need the following to get ready to remove the links after measuring.

1. Find a flat surface and clear it from clutter.
2. Ensure you have a good light source.
3. We recommend working with a tray to help keep small pieces in check.
4. Place a small cloth inside the tray to reduce noise and ensure nothing scratches.
5. You’ll need a set of jeweler’s tools. These sets aren’t difficult to find, there are simple sets on Amazon that will last a long time and save money in the long run.
6. You’ll also need a watch holder or a piece of foam that helps hold your watch in place.

Your work area is prepared. It’s time to alter your watch by incorporating or eliminating links.

Step 3: How to remove watch links.

It’s time to work on those links now. The most important thing to keep in mind is to avoid removing all the watch links from one side of the clasp. 

1. Turn your watch over and look for the small arrow marks showing where the pins come out.
2. Place your watch into the holder or foam piece so that you can see the top of the pin.
3. Use the pushpin tool and the hammer to gently tap the pin until it emerges from the other side.
4. Use your fingers or a small set of pliers to remove the pin gently.
5. Repeat until you’ve removed all your planned links.

As you work, be sure to keep an eye out for any additional pins that might come loose. Keep track of the pins, since you’ll require a couple for the following step.

Step 4: Reattach the clasp and watch links.

Finish your watch now that the extra links have been cut off.

1. Find the pins you need and flip your watch over in the holder. Make sure the arrows are pointing upward.
2. Put the pin back in the hole and gently tap until it’s fully in.
3. Repeat on the other side. Tap any ferrules that fell out of place.
4. Inspect your watch. Try it on to be sure it fits and look for anything that seems out of place.

Step 5: Enjoy your custom-fit watch.

That’s pretty much it. Saving your links and pins for any upcoming fittings or modifications is the only thing left to do. Now that your watch should fit like it was designed just for you, you can start wearing it out.

If you enjoyed this article please share this article, it will go a long way for us. Also, subscribe to our newsletter, follow us on Facebook, Twitter, Pinterest, Google News, and  Instagram for more

“Please leave your comments. Let’s us know what you think, this helps us improve our next article”

Source: fifty7tech.com